S.No | Activity taken upon musteroll | Quantity | Unit Price | Total |
1 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layers by ramming and watering lead upto 50m and lift upto 1.5m | 2.47 | 57.6072874493927 | 142.29 |
2 | Filling foundation, around masonry work, plinth, sides of foundation etc. with moorum I/c ramming layers not exceeding 20cm in depth consolidating each deposited layers by ramming and watering lead upto 50m and lift upto 1.5m. | 0.75 | 273.44 | 205.08 |
3 | (b) C.C. 1:3:6 (1cement, 3sand, 6metal) | 0.62 | 3138.98387096774 | 1946.17 |
4 | (k) Cement mortar 1:8 (1cement, 8sand) | 6.93 | 3740.17748917749 | 25919.43 |
5 | Add for masonry in supper structure above plinth level up to floor two level | 3.9 | 225.064102564103 | 877.75 |
6 | Steel work in single section including in cutting, hoisting fixing in position in R.S. joists, channels, angles, tee. | 50.45 | 63.6705649157582 | 3212.18 |
7 | Providing and fixing M.S. round or square bars at required spacing in wooden frames of windows and clear-story windows including standard threads at the ends of M.S. round window bars I/c cost of standard hexagonal nuts and washers at both ends. | 88.84 | 81.2120666366501 | 7214.88 |
8 | (d) Cement mortar 1:6 (1cement, 6sand) | 38.21 | 99.4878304108872 | 3801.43 |
9 | Providing & fixing of precoated galvanised iron profile sheets (size,shape & pitch of corrugation as approved by engineer in charge) 0.5mm +/- 5% total coated thickness(TCT) thick zinc coating 120 gsm as per IS:277 in 240mpa steel grade,5-7 microns appoxy primer on both side of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns min. to avoid scratches while transportation and should be supplied in single length up to 12 mtr or as desired by engineer-in-charge.The sheet shall be fixed using self drilling / self tapping screws of size 5.5x55mm with EPDM seal or with polymer coated J or L hooks,bolts and nuts 8mm dia. with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/vertical or curved surfaces excluding the cost of purlins, rafters and trusses and i/c cutting to size and shape wherever required. | 12.6 | 576.287301587302 | 7261.22 |
10 | Colour washing 2 coats over and including a primary coat of white washing on undecorated wall surface. | 38.21 | 16.0615022245485 | 613.71 |
11 | (b) Dense or hard soil | 2.47 | 145.789473684211 | 360.1 |