| S.No | Activity taken upon musteroll | Quantity | Unit Price | Total |
|
1 | Filling foundation, around masonry work, plinth, sides of foundation etc. with moorum I/c ramming layers not exceeding 20cm in depth consolidating each deposited layers by ramming and watering lead upto 50m and lift upto 1.5m. | 152.31 | 269.197820235047 | 41001.52 |
|
2 | (a) C.C. 1:2:4 (1cement, 2sand, 4metal) | 1.06 | 3764.2641509434 | 3990.12 |
|
3 | (b) C.C. 1:3:6 (1cement, 3sand, 6metal) | 56.2 | 3125.36120996441 | 175645.3 |
|
4 | (c) C.C. 1:4:8 (1cement, 4sand, 8metal) | 1.04 | 2790.05769230769 | 2901.66 |
|
5 | (b) CC 1:1.5:3 (1 cement, 1.5 sand, 3 graded stone aggregate 20mm nominal size) | 52.13 | 5704.36773450988 | 297368.69 |
|
6 | (c) CC 1:2:4 (1 cement, 2 sand, 4 graded stone aggregate 20mm nominal size) | 4.37 | 5232.19221967963 | 22864.68 |
|
7 | (j) Cement mortar 1:6 (1cement, 6sand) | 110.94 | 3812.98404542996 | 423012.45 |
|
8 | (k) Cement mortar 1:8 (1cement, 8sand) | 12.43 | 3708.51407884151 | 46096.83 |
|
9 | Add for masonry in supper structure above plinth level up to floor two level | 105.56 | 216.082607048124 | 22809.68 |
|
10 | Steel work welded in built up sections, framed work, including cutting hoisting fixing in position in gratings, frames, guard bars, ladders, railing, brackets and similar works & trusses and trussed purlins up to 25m span and 15 m over all height | 5721.43 | 84.5269329520767 | 483614.93 |
|
11 | (b) Cold twisted / Hot rolled deformed / Thermo mechanicaly treated steel bars | 5388.54 | 71.5852735620409 | 385740.11 |
|
12 | Providing and fixing barbed wire fencing with 5 rows of horizontal barbed wire and 2 digonal rows tightened to RCC post as per IS:4996-1984, 2M long, 1.4 m above and 0.6 m belowe ground level, c/c spacing of each post shall not exceed 3M with diagonal strut at every 30M to hold the fencing in line and level. Top and bottom section of RCC post shall be 100mm X 100mm and 150mm X 150mm respectively, with iron pins casted in post. The weight of two ply GI barbed wire shall not be less than 9.38 kg per 100 m lenght of wire. The RCC post shall be casted in M-20 cement concrete as per IS:456-2000, with reinforcement as per IS:432-1982, 10mm dia 4 nos longitudinal bars and 6mm dia stirrups @ 150mm c/c, complete with cost of excavation & filling cement concrete M-15 grade for fixing posts & struts to the pit of size 0.30x0.30x0.60 M for each post and struts etc. complete. | 256.4 | 219.532176287051 | 56288.05 |
|
13 | (c) Cement mortar 1:5 (1cement, 5sand) | 1308.42 | 100.856483392183 | 131962.64 |
|
14 | (b) Cement mortar 1:4 (1cement, 4sand) | 28.3 | 147.873144876325 | 4184.81 |
|
15 | (c) Cement mortar 1:5 (1cement, 5sand) | 182.61 | 139.909150648924 | 25548.81 |
|
16 | (a) 0.63 mm thick sheet. | 125.4 | 625.637320574163 | 78454.92 |
|
17 | (a) 0.63 mm thick sheet. | 19 | 437.452105263158 | 8311.59 |
|
18 | Providing & fixing of precoated galvanised iron profile sheets (size,shape & pitch of corrugation as approved by engineer in charge) 0.5mm +/- 5% total coated thickness(TCT) thick zinc coating 120 gsm as per IS:277 in 240mpa steel grade,5-7 microns appoxy primer on both side of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns min. to avoid scratches while transportation and should be supplied in single length up to 12 mtr or as desired by engineer-in-charge.The sheet shall be fixed using self drilling / self tapping screws of size 5.5x55mm with EPDM seal or with polymer coated J or L hooks,bolts and nuts 8mm dia. with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/vertical or curved surfaces excluding the cost of purlins, rafters and trusses and i/c cutting to size and shape wherever required. | 322 | 575.510652173913 | 185314.43 |
|
19 | Providing & fixing of precoated galvanised steel sheet roofing accessories 0.5mm +/- 5% total coated thickness(TCT) zinc coating 120 gsm as per IS:277 in 240mpa steel grade,5-7 microns appoxy primer on both side of the sheet and polyester top coat 15-18 microns. using self drilling / self tapping screws of size 5.5x55mm with EPDM seal or with polymer coated J or L hooks,bolts and nuts 8mm dia. and or G.I. seam bolts and nuts,G.I. plain and bitumen washers complete. Ridges plain (500 - 600mm) | 46 | 564.285869565217 | 25957.15 |
|
20 | (a) 40 mm thick. | 169.85 | 243.593759199294 | 41374.4 |
|
21 | 40 to 50mm thick flag stone flooring laid over 20mm thick cement mortar (1:6) bedding I/n cement pointing in cement mortar 1:3 | 256 | 513.362421875 | 131420.78 |
|
22 | (b) White cement | 1100.54 | 28.2965635051884 | 31141.5 |
|
23 | (a) 3 coats | 162.29 | 103.916815577053 | 16864.66 |
|
24 | (b) Dense or hard soil (PT/45/45) | 162.5 | 154.151876923077 | 25049.68 |
|
25 | (b) Dense or hard soil | 155.34 | 135.265031543711 | 21012.07 |
|
26 | Citizen Information Board Size 0.9 Meter x 1.2 Meter ( Community Works ) | 1 | 3530.01 | 3530.01 |