Bill No. |
Bill Date (DD/MM/YYYY |
Material |
Total Amount (In Rupees) |
Amount Paid (In Rupees) |
1 |
22/09/2021 |
0298-Stone Aggregate(single size): 06 mm nominal size |
21.1428 |
21.1428 |
1 |
22/09/2021 |
0362-Brick bats |
35.4805 |
35.4805 |
1 |
22/09/2021 |
0982-Coarse sand (zone III) |
90.0731 |
90.0731 |
1 |
22/09/2021 |
0983-Fine sand (zone IV) |
355.312 |
355.312 |
1 |
22/09/2021 |
2201-Bricks |
651.84 |
651.84 |
1 |
22/09/2021 |
2202-Stone aggregate below 40 mm nominal size |
22.449 |
22.449 |
1 |
22/09/2021 |
2203-Coarse sand |
390.7671 |
390.7671 |
1 |
22/09/2021 |
2206-Stone aggregate 40 mm nominal size and above |
224.49 |
224.49 |
1 |
22/09/2021 |
2209-Cement |
95.4148 |
95.4148 |
1 |
22/09/2021 |
2260-Brick aggregate |
16.4626 |
16.4626 |
1 |
22/09/2021 |
2335-Jamuna sand |
1269.1168 |
1269.1168 |
1 |
22/09/2021 |
MR8001-Mason (special) |
936.32 |
936.32 |
1 |
22/09/2021 |
MR8026-Fly ash bricks of 25 Cm. x 12 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance ± 2 % |
5309.78 |
5309.78 |
1 |
22/09/2021 |
MR8037-Granite Stone broken metal 40mm. Size (Hand broken) |
847.14 |
847.14 |
1 |
22/09/2021 |
MR8040-Granite Stone broken chips 12mm. size (Minimum 65% by Wt. Passing through 13.2mm sieve & retained on 9.50mm sieve but whole should pass through 19mm sieve) Hand broken. |
97.3716 |
97.3716 |
1 |
22/09/2021 |
MR8110-Cement |
3733.294 |
3733.294 |
2 |
29/09/2021 |
0982-Coarse sand (zone III) |
132.0761 |
132.0761 |
2 |
29/09/2021 |
2201-Bricks |
1703.52 |
1703.52 |
2 |
29/09/2021 |
2203-Coarse sand |
572.9901 |
572.9901 |
2 |
29/09/2021 |
2209-Cement |
116.4384 |
116.4384 |
2 |
29/09/2021 |
MR8001-Mason (special) |
1585.92 |
1585.92 |
2 |
29/09/2021 |
MR8026-Fly ash bricks of 25 Cm. x 12 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance ± 2 % |
13876.59 |
13876.59 |
2 |
29/09/2021 |
MR8110-Cement |
4797.1176 |
4797.1176 |
2 |
29/09/2021 |
MR8187-SCAFFOLDING CHARGES FOR BRICK MASONRY WORK |
334.62 |
334.62 |
3 |
12/04/2022 |
0298-Stone Aggregate(single size): 06 mm nominal size |
260.6502 |
260.6502 |
3 |
12/04/2022 |
0982-Coarse sand (zone III) |
70.005 |
70.005 |
3 |
12/04/2022 |
0983-Fine sand (zone IV) |
335.2384 |
335.2384 |
3 |
12/04/2022 |
1007-Structural steel such as tees, angles, channels and R.S. joists |
5772 |
5772 |
3 |
12/04/2022 |
2203-Coarse sand |
303.705 |
303.705 |
3 |
12/04/2022 |
2205-Steel |
179.5092 |
179.5092 |
3 |
12/04/2022 |
2206-Stone aggregate 40 mm nominal size and above |
335.2384 |
335.2384 |
3 |
12/04/2022 |
2209-Cement |
97.032 |
97.032 |
3 |
12/04/2022 |
2335-Jamuna sand |
1269.1168 |
1269.1168 |
3 |
12/04/2022 |
MR8001-Mason (special) |
1003.52 |
1003.52 |
3 |
12/04/2022 |
MR8002-Carpenter(special) |
2360.96 |
2360.96 |
3 |
12/04/2022 |
MR8003-Blacksmith(special) |
1232 |
1232 |
3 |
12/04/2022 |
MR8037-Granite Stone broken metal 40mm. Size (Hand broken) |
1003.52 |
1003.52 |
3 |
12/04/2022 |
MR8099-G.C.I. Sheet 0.30mm thick |
7880.612 |
7880.612 |
3 |
12/04/2022 |
MR8110-Cement |
1982.28 |
1982.28 |
4 |
19/04/2022 |
0851-water proofing cement paint |
1034.649 |
1034.649 |
4 |
19/04/2022 |
0982-Coarse sand (zone III) |
102.2073 |
102.2073 |
4 |
19/04/2022 |
2201-Bricks |
100.632 |
100.632 |
4 |
19/04/2022 |
2203-Coarse sand |
443.4093 |
443.4093 |
4 |
19/04/2022 |
2209-Cement |
88.946 |
88.946 |
4 |
19/04/2022 |
3-Display Board |
1642 |
1642 |
4 |
19/04/2022 |
MR8004-Painter/ Polisher(special) |
1173.76 |
1173.76 |
4 |
19/04/2022 |
MR8026-Fly ash bricks of 25 Cm. x 12 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance ± 2 % |
819.7315 |
819.7315 |
4 |
19/04/2022 |
MR8110-Cement |
3450.1694 |
3450.1694 |
4 |
19/04/2022 |
MR8187-SCAFFOLDING CHARGES FOR BRICK MASONRY WORK |
19.47 |
19.47 |
|
|
Total Cash payment(In Rupees) |
70176.088 |
70176.088 |